Download Mac Address Changer For Windows 8

Posted : admin | On 27-01-2021



Technitium MAC Address Changer is a powerful MAC address manager of the network adapter. You can use Technitium MAC Address Changer to easily change MAC address of all the network connections with preset Mac address or random MAC address.

You can also delete damaged Network Adapter entry from Registry. Run TMAC.exe to launch Technitium MAC Address Changer Portable. The current version is Technitium MAC Address Changer 6.0.3.

Features of Technitium MAC Address Changer:

* Internet Protocol v6 (IPv6) support added.
* Works on Windows 7 and Windows 8 (Developer Preview) for both 32-bit and 64-bit.
* Automatic Update feature added to update software to latest available version.
* Update network card vendors list feature allows you to download latest vendor data (OUI) from IEEE.org.
* Enhanced network configuration presets with IPv6 support allow you to quickly switch between network configurations.
* Command line options with entire software functionality available. You can select a preset from specified preset file to apply directly.

About Technitium MAC Address Changer Portable

Website: www.technitium.com
Password: www.thinstallsoft.com
MD5 Hash: F8E6601C37974223A9AD91FD8606190F

MAC Address Changer 6.0.7 is available to all software users as a free download for Windows 10 PCs but also without a hitch on Windows 7 and Windows 8. Compatibility with this Mac changer software may vary, but will generally run fine under Microsoft Windows 10, Windows 8, Windows 8.1, Windows 7, Windows Vista and Windows XP on either a 32-bit. Run TMAC.exe to launch Technitium MAC Address Changer Portable. The current version is Technitium MAC Address Changer 6.0.3. Features of Technitium MAC Address Changer:. Internet Protocol v6 (IPv6) support added. Works on Windows 7 and Windows 8 (Developer Preview) for both 32-bit and 64-bit. Download MAC Address Changer - Change the Media Access Control Address of any network interface with just a few clicks thanks to this simple and intuitive application.

Download Technitium MAC Address Changer Portable 6.0.3
TechnitiumMACAddressChanger_6.0.3_English.paf.exe | 1.19 MB
@ThinstallSoft.com | Technitium MAC Address Changer Portable 6.0.3 Download Page
Address

MadMACs: MAC Address Spoofing and
Host Name Randomizing App for Windows 7
(Should work in Windows Vista and Windows 8 too)
from Irongeek

Mac address changer download for windows 10

I wrote MadMACs awhile back, as a simple script to randomize my MAC address (and host name) in Windows on every boot. I had not updated it in a long time so it stopped working well in newer versions of Windows (Windows 7, Windows Vista and Windows 8). When someone would try to get MadMACs to work on a newer version of the OS, Windows would not always respect the registry setting for what MAC address they were suppose to use. Seems that if it is a wireless interface, the 2nd nibble has to be a 2, 6, A or an E on Windows Vista and newer. I included functionality in the new version of MadMACs to make sure this nibble is correct if you tell it the NIC you are trying to change/randomize the MAC address on is a WiFi card. I've also added a GUI for configuring your MAC addresses on your network cards (the old version used prompts), made the config file more INI like, and made it so that MadMACs itself can reset your adapter and start using the new MAC address immediately (name changes will take a reboot).

Source code is included. Here are the simple directions:

Download Mac Address Changer For Windows 10

Address

1. Place the EXE where you intend it to be ran from.
2. Choose the interface to configure.
3. Set a prefix (or the whole MAC address if you don't want to randomize) you want to use.
4. Set the 'Change Default MAC address on this interface' check box.
5. Set 'Check if this is a WiFi NIC (or some problematic wired ones) under Vista/7/8 (2nd nibble randomly set to 2, 6, A or E)' however you want.
6. Click 'Save/Apply' to save and apply you MAC address settings.
7. Toggle 'Run On Startup' as you see fit. Turn it on if you want to randomize the MAC address on every boot.
8. If you want to rename the computer on each boot (useful for some DHCP related logging issues), rename 'Sample dic.txt' to 'dic.txt' or provide your own computer name list text file in the same directory.

Enjoy, and I take no responsibility if it screws anything up. It's been working fine in my Windows 7 64bit test environments so far.

Notes from older, pre-2.0 versions

Description:
I hope you enjoy this little MAC address and host name changer. When Glj12 told me about his host name randomizer, I told him about my desire to make a MAC address randomizer. We decided it would be cool to rap them both together, so I ported parts of his VBScript to Autoit3.

MadMACs was designed with the privacy paranoid in mind. The two main things a DHCP server records when you get an IP from it is your host name and the MAC address of the network card you are connecting from. This is identifying information that not all users want to leave behind. MadMACs allows you to randomize this information after it runs and reboots.
If you have the source It can be compiled with Autoit3 from:
http://www.autoitscript.com
I chose Autoit3 because it's free and very flexible. To find the latest version of MadMACs and its documentation visit:
http://irongeek.com
and look in the apps section.
Configuring MACs to Spoof and Randomize:
The first thing you should do is copy MadMACs.exe to what ever directory you plan to have it run from. If mac-config.txt does not exist in the same directory as the binary a wizard will come up and guide you through configuring which adapters get their MAC addresses randomized. The Wizard will ask you what prefix to use on the MAC address, keep the default 00 unless you want to use a specific vendor's MAC address range. For a list of vendor specific prefixes see:
http://standards.ieee.org/regauth/oui/oui.txt
This wizard also lets you set a registry entry to automatically run the randomizer on start up. There are two possible command line parameters:
config
Brings up the setup wizard
remove
Removes all of the registry entries.

If you run MadMAX without parameters you are asked 'Do you wish to remove MadMACs from startup and clear the registry? Click No to configure MadMACs instead or Cancel to forget the whole matter.' Make the logical choice to get the desired outcome.

If you want MadMACs to randomly set your host name make a text file called dic.txt in the same directory as the binary. This text file's format is one word after another separated by line feeds. If you are feeling lazy just rename the file 'sample dic.txt' that comes with MadMACs to 'dic.txt'. MadMACs will randomly select a word from dic.txt and make that your host name. You may not want to use the host name randomizing functionality if you need to reach the host with the same name every time.
Most of the setting don't take effect until the computer reboots (sort of :) there are exceptions, like if you disable and enable the adapter). Basically, the current session randomizes the next session. If you have questions about the code, ask on the Binrev forums so I don't have to answer the same questions over and over again in email.
I take no liability for the misuse of this code. If you mess up your system or network with a bad MAC address or host name it's your fault. Use at your own risk. I've only tested it in Windows XP, and Vista so far. Consider this code GPLed.
Side Notes:

A patron of my website pointed out that MadMACs, and other similar tools, seem to have a problem randomizing the MAC address under Windows Vista if you are using the Intel Wireless WiFi Link 4965AGN chipset. It will work with the 4965AGN if you randomize only the last two digits, and start it with the prefix 1234567890. It will also let you set the whole MAC address to DEADBEEFCAFE, or even let you randomize all 12 hex digits. However, if you take the default prefix of 00, MadMACs will make a random address up and put it in the NetworkAddress registry value, but the 4965AGN chipset drivers will not honor it. If anyone knows why, please contact me.
For more information on how MAC addresses work read my article here:
http://www.irongeek.com/i.php?page=security/changemac
Thanks to Chronos and the others from BinRev for helping me with the name.
http://www.binrev.com/forums/index.php?showtopic=25548
Thanks to the Ispell project for the sample word list. If you want a more polished Windows MAC Spoofing tool see:
http://www.gorlani.com/publicprj/macmakeup/macmakeup.asp
It's great, the only reason I wrote MadMACs was to better automate the randomization of MAC addresses and to add in the host name changing functionality.
If you want a simular tool to this for Linux look at:

Change Log:

ForDownload

Ver. 2.0: 12/26/2012 GoHP from: http://gohpdee.com/ told me awhile back a few tips of how things have changed in versions of Windows post XP (Vista, 7 and 8) when it comes to setting a MAC address. Seems that if it is a wireless interface, the 2nd nibble has to be a 2, 6, A or an E. I included functionality in the new version of MadMACs to make sure this nibble is correct if you tell it the NIC you are trying to change/randomize the MAC address on is a WiFi card. I've also added a GUI for configuring your MAC addresses on your network cards (the old version used prompts), made the config file more INI like, and made it so that MadMACs itself can reset your adapter and start using the new MAC address immediately.

Windows Mac Address Changer

Ver. 1.2: Qwasty let me know that if host name randomization is used with MacMACs, and the host name is over 15 characters (or has certain bad illegal characters) it can cause all sorts of lsass.exe errors on boot up. To fix this, I've updated the code to do some sanity checks on the possible hostnames given to it in dic.txt. Hopefully this fixes the problem. I also compiled it with the newer Autoit3 v3.2.12.1.
Ver. 1.1: Added better Vista support. It's compiled with Autoit3 v3.2.1.14 (beta), so older versions may not compile the script right. When you login to Vista you will still have to either tell it to run via the error message you see in the system tray about start up apps, or just turn off User Account Control (UAC).